 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet(Preliminary) TOP View LEDs 67-21SUGC/B067/TR8 Features P-LCC-2 package. White package. Optical indicator. Colorless clear window. Wide viewing angle. Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. Computable with automatic placement equipment. Available on tape and reel (8mm Tape). Pb-free. The product itself will remain within RoHS compliant version. Preconditioning: acc. to JEDEC Level 2 ESD: up to 2KV acc. to JESD22-A114-B Descriptions The 67-21 series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications Automotive: backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. Light pipe application. General use. Device Selection Guide Chip Material InGaN/SiC Emitted Color Brilliant Green Lens Color Water Clear Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Prepared date:05-Sep-2006 Rev. 1 Page: 1 of 9 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-21SUGC/B067/TR8 Package Dimensions 3.1 0.2 2.4 2.2 0.1 2.7 0.2 Polarity Cathode 3.5 0.2 0.5 0.1 2.7 0.2 0.8 Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Prepared date:05-Sep-2006 2.2 0.1 1.9 0.2 0.8 0.15 Rev. 1 Page: 2 of 9 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-21SUGC/B067/TR8 Absolute Maximum Ratings (Ta=25) Parameter Reverse Voltage Forward Current Peak Forward Current ( tp10s , duty0.005 ) Power Dissipation Junction Temperature Operating Temperature Storage Temperature Soldering Temperature Symbol VR IF IFP Pd Tj Topr Tstg Tsol Rating 12 30 100 80 100 -40 ~ +100 -40~ +110 Unit V mA mA mW Reflow Soldering : 260 for 10 sec. Hand Soldering : 350 for 3 sec. Electro-Optical Characteristics (Ta=25) Parameter Luminous Intensity Viewing Angle Symbol Iv 21/2 Min. 75 --------523 ----2.6 ----- Typ. ----120 518 ----36 --------- Max. 320 --------535 ----3.8 10 Unit mcd deg nm nm nm V A Condition IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA VR=12V Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage P d VF IR Reverse Current Notes: 1.Tolerance of Luminous Intensity 11% 2.Tolerance of Dominant Wavelength 1nm 3.Tolerance of Forward Voltage 0.1V Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Prepared date:05-Sep-2006 Rev. 1 Page: 3 of 9 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-21SUGC/B067/TR8 Bin Range Of Luminous Intensity Bin Min Q2 90 R1 112 R2 140 S1 180 S2 224 Notes: 1.Tolerance of Luminous Intensity 11% Max 112 140 180 224 280 Unit Condition mcd IF=20mA Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Prepared date:05-Sep-2006 Rev. 1 Page: 4 of 9 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-21SUGC/B067/TR8 Typical Electro-Optical Characteristics Curves Typical curve of spectral distribution: V()=Standard eye response curve 100 Relative Intensity (%) V() SUG 50 0 400 450 500 550 600 650 700 Wp (nm) Diagram characteristics of radiation: 20 30 40 50 View Angle 60 70 80 90 o o o o o o o o 10 o 0 o 1.0 Relative Intensity 0.8 0.6 0.4 0.2 0 1.0 0.8 0.6 0.4 0.2 0 20 o Relative Intensity 60 40 View Angle o o 80 o Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Prepared date:05-Sep-2006 Rev. 1 Page: 5 of 9 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-21SUGC/B067/TR8 Forward Current vs. Forward Voltage 100 Ta=25 Forward Current I F (mA) 10 1 2.5 2.7 2.9 3.1 3.3 3.5 3.7 3.9 For war d Voltage V F ( V) Forward current v.s. ambient temp. 40 35 30 25 20 15 10 5 0 0 20 40 60 80 100 T (degree C) IF(mA) Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Prepared date:05-Sep-2006 Rev. 1 Page: 6 of 9 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-21SUGC/B067/TR8 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank RoHS Reel Dimensions 2.2 0.5 178.0 1.0 13.0 0.5 Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Prepared date:05-Sep-2006 9.0 1.0 12.0 1.0 60.0 1.0 Rev. 1 Page: 7 of 9 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-21SUGC/B067/TR8 Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel. Progressive direction 2.00.05 1.75 4.00.1 1.5+0.1 3.50.05 8.00.3 1.75 2.24 Page: 8 of 9 0.23 Polarity 4.0 3.23 Note: The tolerances unless mentioned is 0.1mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Prepared date:05-Sep-2006 Rev. 1 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-21SUGC/B067/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 A. Pb-free solder temperature profile B. Recommend soldering pad 1~5 C / Sec. 260C. Max. 10 Sec. Max. 1~5 C / Sec. Pre-heating 180~200C 1.5 1.5 1.5 2.6 60 Sec. Max. Above 220C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Prepared date:05-Sep-2006 Rev. 1 Page: 9 of 9 Prepared by: Ray Yuan |
Price & Availability of 67-21SUGC-B067-TR8
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |